Emergency & Exit Light Testing

When the power goes out, or worse, when the fire alarm sounds — your emergency and exit lights need to work. Not sometimes. Every time. Barcam Electrical provides six-monthly emergency and exit light testing to AS 2293 across commercial, industrial and public buildings throughout the Mackay region, with the documentation and reporting your certifier and insurer will want to see.

When you might need us

  • Your building is due for its six-monthly emergency lighting test

  • You've just completed a fit-out or renovation and need commissioning testing

  • Your compliance program or building certifier requires documented testing

  • You've had lights fail during a previous test or inspection

  • You've never had a formal testing program set up and aren't sure where you stand

  • You're taking on a new tenancy and need to establish a baseline

What we do

Our team carries out the full six-monthly discharge test required under AS 2293.2 — simulating a mains failure, running the luminaires on battery for their full rated duration, and confirming that every light in the system meets the standard. We also carry out visual inspections, note any faults, and provide a full report covering:

  • A register of every luminaire on site

  • Test results for each fitting

  • Any failures, faults or defects identified

  • Recommended remedial action (battery replacement, lamp replacement, fitting replacement)

  • Records suitable for your logbook and building certifier

FAQs

Talk to us about your emergency lighting

Whether you need a one-off test or ongoing six-monthly service, we'll get it sorted.

Coffee Hops

Photography | Design | Websites

https://www.coffeeandhops.com
Previous
Previous

RCD (Safety Switch) Testing

Next
Next

Commercial EV Charger Design & Installation